BIKE TECH

CAMBERWELL

Station Power Meter Numbers

 

Power meter numbers, will be displayed at each studio.

 

The Stage SC3 Bikes have an extra layer of configuration to over Richmond if you wish to have your ride at CC Camberwell uploaded to Strava, or Training Peaks.

 

The bike computer on the SC3 acts as the brain of the system and calculates the Speed and Distance on the fly as the Stages Power Meter can only send Power and Cadence. Getting your GARMIN to sync will only give you these variables, we have also tested “indoor training” mode without success on these bikes. The way forward is to use the Stages Flight App and follow the below steps:

 

  1. Use this LINK to setup a Stages Account, you need to do this on a Desktop Computer / Mac as the Strava import setting is not available on the mobile app version ( yes, super annoying )
  2. Then use this LINK to sync your Stages account with Strava / Training Peaks ( important to do this before recording a ride at CC )
  3. Using the Stages Flight App search for unique ID of your Bike, you can do by looking at the power meter # on the crank arm to see the 4-5 digit ANT+ id that will be used to identify the sensor on your app’s sensor list, or the POWER METER button below.
  4. Press START/Record, and then FINISH at the end of the session.
  5. RIDE will upload to Strava
Stages indoor spin bike

BIKE TECH

CAMBERWELL

Indoor bike computer and power card

Station Power Meter Numbers

 

Power meter numbers, will be displayed at each studio.

 

The Stage SC3 Bikes have an extra layer of configuration to over Richmond if you wish to have your ride at CC Camberwell uploaded to Strava, or Training Peaks.

 

The bike computer on the SC3 acts as the brain of the system and calculates the Speed and Distance on the fly as the Stages Power Meter can only send Power and Cadence. Getting your GARMIN to sync will only give you these variables, we have also tested “indoor training” mode without success on these bikes. The way forward is to use the Stages Flight App and follow the below steps:

 

  1. Use this LINK to setup a Stages Account, you need to do this on a Desktop Computer / Mac as the Strava import setting is not available on the mobile app version ( yes, super annoying )
  2. Then use this LINK to sync your Stages account with Strava / Training Peaks ( important to do this before recording a ride at CC )
  3. Using the Stages Flight App search for unique ID of your Bike, you can do by looking at the power meter # on the crank arm to see the 4-5 digit ANT+ id that will be used to identify the sensor on your app’s sensor list, or the POWER METER button below.
  4. Press START/Record, and then FINISH at the end of the session.
  5. RIDE will upload to Strava